What Size Hardware For Skateboard – as per experts

As you know, skateboarding is more than just a sport. It’s an activity that people of all ages can enjoy. Many skaters love to skateboard❤️ so much that they want to upgrade their board and hardware. But do not know what size hardware for skateboard they need for the task.

Here at SkateVella, we want you to have the best experience possible when upgrading your boards and hardware. For your next skateboard project, we’re here to help you choose the right size of hardware.

Skatevella recommends the Magneto Mini Cruiser Skateboard Canadian Maple Deck – Designed for Kids, Teens, and Adults as one of the top boards you should try if you want to start skateboarding.

What Size Hardware For Skateboard Do You Need?

Choosing the right skateboard equipment accessories can be challenging, but the right guide will make it easier for you.

If you want to get new hardware for your board, a few key points should be considered before buying new hardware for your skateboard.

What to look for in skateboard parts selection

The material of the deck

The material of a deck is vital for performance, control, and style. A deck is made from various materials. Before you determine what size hardware to get, you need to know the material of your board.

Because it affects how well you control and maneuver your board. Some deck materials are soft and flexible, while others are stiffer. A softer, more flexible board will give more under the skater’s feet. But it will be more challenging to control.

A stiffer deck is best for beginners because they are easy to balance and easier to control. It may not give as much comfort under your feet, but it’s also much easier for you to perform tricks with. You should choose what size hardware for the skateboard you need depending on the material of your board.

Width of trucks

When choosing skateboard hardware, you should also consider the width of skateboard trucks. The truck’s width directly correlates with the size of the screw or bolt that needs to be used.

For example, if you have an expansive deck and wide trucks. You will need 4-inch bolts not to crush the deck between the trucks.

Bearings and screws

It is important to consider the bearing size when choosing hardware for your skateboard. It will help you determine what size screws or bolts you need to upgrade your bearings.

If you don’t know the size of the bearing currently in use on your skateboard. It is a good idea to take the old ones out and measure them before buying new ones. Consider choosing a different size of bearings than what is currently on your skateboard. This will affect the size of the hardware needed.

Bearing sizes are either 608 or 688. Each has an outer diameter of 22mm and an inner diameter of 8mm. Though they both work with the same trucks and hardware, 608 bearings are .6 millimeters wider than 688 bearings.
If you replace the bearings on your skateboard. You might have to change the size of the screws or bolts when upgrading to a larger or smaller size than what is currently installed.

Bolts and wrench for skateboard

When choosing skateboard hardware, it is important to remember that you will need a wrench. If the bolts are not pre-installed on the board.

You should have a wrench before starting any project if you don’t have one. You can purchase one at your local hardware store.

But it is also a good idea to check good quality wrenches from an online store to save your time. It’ll cost between $5 and $10.

Using the right amount of force is important when tightening bolts to your board. There’s a chance that if you pull them too hard, you’ll damage the hardware or even crack your deck.

To avoid this, always make sure that when you are using a wrench on bolts. You turn it counter-clockwise to tighten and clockwise to loosen.
Skateboard hardware is one of the essential parts of your board. As they attach wheels and bearings to a deck.

Exact Dimensions Table

Width of DeckWidth of TruckAxle LengthWheel SizeShoe SizeGrowth
7.4” – 7.8”5.0”7.6”48 – 54 mm5” – 6.5”55” – 59”
7.8” – 8.1”5.25”8.0”54 – 56 mm6.5” – 8”59” – 69”
8.1” – 8.5”5.5”8.2”56 – 58 mm8” – 9.5”62” – 72”
more than 8.5”5.75”8.4”58 – 60 mm9.5” – 11.5”70” – 76”

Conclusion

When choosing hardware for your skateboard, it is important to remember that bolts come with different amounts of threads per inch. If you have a bolt that only has a couple of inches worth of threading, this will affect the amount of force needed when tightening or loosening them.

When using bolts on polyurethane wheels, it is generally not good to use bolts with more than four inches of threading because this can damage the wheel.

After reading the article, What Size Hardware For Skateboard and watching the video, I hope you will come out from your confusion and get your answer.

Please share this:

Leave a Comment