Maintaining your equipment is very important to get them excellent usage. It is essential to know how to clean a skateboard. With all of the different parts that make up a skateboard, it’s necessary to understand how to clean them properly.
Taking care of and maintaining your board will increase its lifespan and ensure safety when riding. Follow our detailed instructions for each component above to keep everything working smoothly.
So nothing goes wrong on an otherwise great day out there rolling on a skateboard around town looking stylishly dressed in jeans with some fresh sneakers thrown into the mix too.
How To Clean Skateboard Bearings
To ensure your bearings keep spinning smoothly and quickly, you should clean them regularly. The best way is with a soft brush made especially for the job or by following these instructions:
A dirty skateboard will slow down in both performance capability and aesthetics. So we must maintain our decks at their peak condition. One easy method of doing this involves cleaning out dirt/dust build-up.
- Remove the bolts from your truck’s axle and slip them halfway onto one end.
- Hold on tight.
- Twist both sides outward until you can see some of those pesky tiny bearings inside taking up all that space- just like they were doing me in my sleep-deprived state at work tonight, but hey, nothing a few cups (or shots) can’t fix.
- Keep an eye out for these as well; when removing them, make sure not only does each bearing have room between them, or else there will be a lot less give than expected, which could cause further damage.
To clean the inside of your bike’s bearings, prepare a small bowl with one or more solvents like mineral spirits and isopropyl alcohol. Then soak them for about 5 minutes before wiping down any parts that are difficult to reach around corners – this includes both surfaces and tight spaces between teeth on rings, etcetera.
You must take out the bearings and dry them as soon as possible. To do this, use a cloth or paper towel to clean off any excess water from within each approach before letting it air-dry—do not put it in an oven.
If they are slower drying even with extra time spent on cleaning, then blast away using compressed air because friction caused by lack of lubrication can lead your skateboard wheels to burn up quickly, which would make no fun at all.
When placing back into operation after finishing prepping for storage, apply 1 -2 droplets of lube per wheel based on how long ago it was last oiled.
Put the shields in position and push gently from their center outwards until they snap back on. Then, you’re all set to go. Replace your wheel bearings with lubricated ones for improved ride quality and smoother turns. No more scraping or catching up against things now.
So quickly because of rough surfaces like wood floors that can slow down. Otherwise, fast-moving boards if not careful about what’s around them when riding downhill slopes too steeply without knowing beforehand where these obstacles might be located near landings along any path uphill towards higher ground levels.
- Click to Read: What Size Hardware For Skateboard
- How To Be Self-Confident When You Ride Your Skateboard
Cleaning Skateboard Grip Tape
Grip tape is a crucial component in having an excellent riding experience. You should always keep your grip clean and free from dirt, sweat, or other substan
ces that might reduce its effectiveness by making it less sticky than usual, which will make Landing tricks difficult if not impossible.
Here’s how you can restore the original appearance of your deck while also ensuring maximum traction with these simple steps. You will need the following items first.
- Paper towel
- Liquid cleaning products
Many people use gum specifically made for skateboards to clean their grip tape. If you do this, rub the entire surface and then brush away all of the dirt with an old toothbrush; be careful not to damage it in any way.
Next, fill up a bucket or jar halfway full with hot water before adding six tablespoons of dishwashing liquid (or any other type) which will act as your detergent component at first rinse time throughout the washing process applying onto dirty areas such as decks.
The best part about cleaning one’s board is that there isn’t anything more satisfying than seeing their deck looking brand spanking new after-hours of hard work grinding downhills.
Groom your grip tape as aggressively with a wet brush until you notice foam. While at it, ensure that all of the small and deep dirt spots are eliminated to give off a great appearance.
The easiest way is by using paper towels or dry cloths, so they are not drenched after being exposed underwater. At the same time, they were scrubbing away stubborn grime stains from time to time. Alternatively, put these items on top somewhere shaded so they can air out before putting back into use again.
If there’s no sun around (or if weather conditions make this necessary), relying heavily upon hairdryers is the only option.
Cleaning Skateboard Wheels
Clean your skateboard wheels with these simple steps. First, remove the axle bolts from each side and take out the rotation. Separate any bearings by gently prying them apart; you will need to clean them individually. Next is scrubbing off visible dirt or stains on a dry cloth if desired before soaking in warm water for 10 minutes.
You can add dish soap if needed, but be careful. Some metal parts might rust more than others under running tap water because they contain aluminum chloride salts that form when Cl2 molecules meet sulfur compounds such as hydrogen sulfide.
With your cloth or toothbrush, gently scrub the wheels once more after removing them from the liquid. Dry them gently with paper towels. Reinstall the bearing shields and the bearings in the wheels. Your skateboard will be as good as new once you reconnect it to the trucks.
Knowing how to clean a skateboard is essential if you are a beginner or a pro. A clean skateboard can assist you in learning new tricks as well as ensure your safety when traveling at high speeds.