how long do longboards last – SkateVella

The answer to this question is not straightforward, and it depends on a lot of factors. For example, the type of board you buy will make a difference in how long it lasts.

A cheap plastic board might last less than a year, while an expensive wood one could last for many years. Such as White Wave Bamboo Longboard Skateboard

The rider’s weight also makes a difference because heavier riders put more pressure on the board, shortening its lifespan. Finally, how often you use your longboard will play into whether or not it lasts as well.

How Long Do Longboards Last Complete Information

How long do longboard wheels last

How long do longboard last

Did you know that longboard wheels can last for years? Some people have wheels that, even after a decade, still roll just as good as the day they bought them. This is because well-made and high-quality wheels are made with materials that don’t wear down quickly.

For example, polyurethane (PU) wheels are more resistant to wear and tear than traditional urethane wheels. The average longboard wheel will last for miles and miles before stopping or slowing down significantly.

Of course, if you’re a beginner and don’t know how to push your board correctly, you could wear down your wheels much faster than someone who rides frequently and knows how to push.

how long do longboard bearings last

Another essential part of the longboard that can impact how long it lasts is the bearings. Depending on what kind you get, they could last for a few months or several years.

Bearings are responsible for making sure your wheels spin freely when in use, which allows them to roll faster and more smoothly. It’s essential to clean your bearings regularly, so you don’t have any problems with them later down the line.

If this is done correctly, most people find their bearings last much longer than usual before needing to be replaced again.

how long do longboard trucks last

The trucks are the last thing you need to think about when it comes to how long a longboard lasts. These are responsible for holding your wheels and bearings together, so they don’t fall off while riding.

How long do longboard last

Kind of like the axle on a bike. Each truck has a metal rod running through its center, which holds everything together. The average person finds that their trucks will not wear down for many years if they’re taken care of properly.

It’s important to tighten them from time to time but never overdo it because doing this too often could cause damage. Keeping them clean and oil can help prevent rusting or other types of corrosion that might affect their performance.

How long do longboard decks last

The last thing you should know about longboard decks is that they can wear down as well. If you’re a beginner, chances are you’ll put a lot of pressure on the deck while learning how to ride, which could shorten its lifespan.

However, once you get more comfortable riding and holding your balance, this will cease to be a problem. Wood decks tend to last much longer than plastic ones because their structure makes them more durable.

You might also want to consider using grip tape when skating through busy streets or areas where there’s a lot of debris flying around because it can protect against scratches and scuffs on the surface.


What is a longboard, and what are the benefits of using one?

A longboard is a more extended version of a skateboard that is usually designed for cruising or carving. Unlike skates, the wheels on longboards are situated further apart, and they come with larger trucks. This gives them better stability but also decelerates their momentum when going downhill.

They’re often used for transportation but more often for recreation or fun on hills. They are also used to break free from the monotony of traveling everywhere by foot.

How to choose a board that matches your needs

When choosing a longboard, there are many factors you need to take into account. The deck length and shape, the material it’s made of, and the width of the wheels.

These will determine how well it turns and the type of terrain you can ride on comfortably. Some boards come with kicktails that let you pull tricks or do freestyle tricks. Others come with sweet designs, making them more appealing at first glance.

Before purchasing a longboard, make sure you’ve taken all of these factors into account so that when it’s in your possession, you have the right board for you.

How to maintain your longboard so it lasts longer.

As mentioned before, proper maintenance can help your board last longer. So if you’re a beginner skater and want to get the most out of your longboard, you’ll need to follow these simple steps:

  • Keep it clean. This means regularly wiping it down, so debris doesn’t stick to it.
  • Wipe off the wheels and bearings after every use. This will make them last longer.
  • Get some grip tape to guard against scuffs and scratches when you’re riding through busy streets or areas with debris.
  • Clean the bearings with alcohol every after 5-6 months.
  • Keep it out of extreme heat or cold to prevent cracking.
  • Replace the grip tape now and then to prevent it from peeling off.
  • Apply WD-40 to the trucks once a year.
  • Lay your board flat instead of leaning it against a wall because this might cause warping.
  • Please do not bring your board to areas with big rocks or debris because it could get scratched.

Common pitfalls for beginners, how to avoid them

If you’re a beginner and you’ve just gotten your first board, there are some common mistakes that it’s best to avoid. First of all, you should never put pressure on the board when you’re just learning how to ride it. That might cause unnecessary wear and tear on the deck if you’re moving too fast or going down steep hills.

You should also avoid riding in a crowded area because you might accidentally hit an obstacle and get your board scratched. Use the proper grip tape when you’re taking your board to busy streets or areas with lots of rocks and debris flying around.

Keep your eyes peeled and be aware of cars and other obstacles because you might not see them in time to avoid a collision.

What gear do you need if you’re going downhill or cruising around town? 

You’ll need a helmet, elbow pads, and wrist guards if you’re going down steep hills. Even for cruising around town, it’s essential to wear a helmet and wrist guards to protect yourself from random debris.

You can also use elbow pads if you’re going over rough terrain like bumpy roads and sidewalks. If you choose to wear wrist guards, make sure they’re made of a flexible material, so your wrists don’t twist when you fall.

What are the benefits of a longboard?

Longboards are one of the best ways to get around because they’re quick and easy to use. They also provide you with a stable and steady ride that’s smooth and enjoyable. You can use them for fun or work if they’re the right size and shape.

How much do longboards cost?

Longboards range anywhere from about $35 to $300 depending on the deck style, shape, and size. You can also invest in protective gear if you’re new to skating and don’t know how to fall gracefully. That will certainly cost more than your board.

Are there any disadvantages to riding a longboard

Like any other type of equipment, longboards aren’t perfect. The main disadvantage is that they might not be the right size and shape for your body. While the boards are versatile, you might need to try a few before finding one that works best for your size and shape.

How often should you replace your longboard bearings, and how can you tell when it’s time for replacements

It would be best if you replaced your bearings every 5-6 months because dirt and debris can build up in them over time. And, if you’re a beginner, you should replace them as soon as you notice a squeaking noise coming from your wheels.

Why is it essential to maintain your longboard properly

When you take care of your board, it will last longer. You’ll also have more fun when you know that all the equipment is in good condition. Dirt and debris can scratch your deck or make it peel, especially if you’re using the wrong grip tape for the job.

Longboarding is an enjoyable activity, especially if you have the right equipment.

What should I do if my board breaks down or gets damaged while I’m out on the road?

If the board breaks down or gets damaged while you’re out on the road, your best option might be to jump off and avoid injury. If that’s not an option for some reason, you should do your best to land on the balls of your feet and roll away from the fall.

How long does it take to learn how to ride a longboard?

It usually takes about 30 minutes to learn how to ride a longboard well. Some people might need an hour or more when starting because they’re not used to the equipment or don’t have enough experience riding longboards.

What are the best features of different types of boards?

The best features for different types of boards are the size, shape, material, and color. Boards made of bamboo are usually solid but flexible; aluminum and other metal boards are stiff but light; resin and plastic boards might not be as durable, but they’re relatively inexpensive.

Why do some longboards cost more than others?

Longboards that cost more are usually made of higher-end materials like aluminum and carbon fiber. They’re also easier to ride, and they last longer, so it’s worth paying a little extra to get the best equipment you can afford.

What is the average lifespan of a board before it needs replacing

Longboards typically last about 5-6 years before they need to be replaced. The lifespan of boards can depend on the materials used to make them, how often it’s used and who is using them.

Is there anything you should avoid doing with your board that will decrease its lifespan?

Yes. You should avoid doing 90-degree turns and other abrupt movements with your board because it can damage the bearings and the wheels. Longboarding is all about cruising and coasting, so it’s best not to take too many risks with your equipment.


Please share this:

Leave a Comment